Includes 16, 50mm tubeless repair strips.

Kenda Kwest High Pressure Road tire is designed with a smooth rounded tread with large water dispersion grooves. - The Kwest High Pressure Road Recumbent tire is constructed of a steel bead and rates at a max of 100 PSI

Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.

The Ikon is a lightweight, high-volume XC tire that rolls fast and has ample tread to provide secure traction in varied conditions. - Ramped center knobs roll fast and provide excellent traction for climbing and braking - Progressive shoulder lugs deliver secure traction in the corners - Intended use: hardpack, loose, loose over hard, medium - MaxxSpeed is a high-silica content compound that reduces rolling resistance while also enhancing traction in wet conditions - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible

THE ORIGINAL: The archetypal high quality touring tire. The highly elastic GreenGuard layer is 3mm thick. One third of the GreenGuard is made up of recycled latex products. The "Anti-Aging" sidewall can withstand the typical cracking that results from overloading due to insufficient inflation pressure for much longer. E-BIKE READY. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50). - Very good puncture protection thanks to GreenGuard - Especially suitable for asphalt - Available in many sizes - Performance line - E-rating: E-25 - 800g

The Eliminator is your go-to rear tire for fast rolling and confident cornering traction on aggressive, technical terrain. Its fast-rolling compound and optimized tread deliver the perfect balance of low rolling resistance and exeptional control. With an alternating tread pattern for smooth center-to-edge transitions and stack knobs for stability. it's built for speed, precision, and confidence.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - T9 high grip compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready. - GRID 29x2.4' T9, psi 25-50, approximate weight 965g.

Stan’s unveiled the Dual Action Repair for Tubeless (DART) Tool in 2019, ushering in the first repair plug designed specifically for tubeless bicycle tires, rather than a scaled-down version of what was available in the automotive and motorcycle world. Subsequent refinements made way for the tool’s rerelease as the Original DART Tool in 2025, introducing a stainless steel insertion rod accompanied by an improved DART developed through the first tool’s lifespan. By using a flexible, laser-cut material, the DART conforms to nonuniform puncture shapes caused by the jagged and sharp edges of debris and obstacles found on trails, roads, and paths. Treated with a reactive solution, the DART bonds with liquid sealant on the inside of a tubeless tire to form both a chemical and mechanical seal to permanently bond a puncture too large for tubeless sealant to repair on its own. Complete with two DARTs, the tool weighs only 15-grams and fits comfortably in any small pack pocket. For added convenience, the base of the molded plastic tool body features a Presta valve core remover to aid in-the-field sealant topoffs with either a 60ml or 120ml bottle of Stan’s Original Tubeless Sealant. - Includes two DARTs, refills sold separately - Repairs punctures and slices too large for sealant alone to seal - Woven, laser-cut material easily conforms to nonuniform puncture shapes - Base of tool features molded Presta core tool for sealant top-offs - Clear caps keep DARTs clean and unthread for quick use

Thin, low viscosity liquid with improved sealing capabilities over the standard NoTubes sealant. - Twice the sealing crystals compared to standard NoTubes sealant - XL crystals and standard crystals combine to seal larger punctures - Stable down to -30 degrees Fahrenheit - Not compatible with injectors or through valve cores

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

Alloy air valve caps help prevent air loss

Serfas replacement inner tubes are lightweight, durable, and affordable.

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.

- Shim adds support to Presta stem used in a Schrader rim

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Presta Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Decreased air loss design - Butyl rubber

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

- Valve: Presta - Butyl rubber - Wall thickness: 0.9mm

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

Continental bicycle tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.