Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- High Performance Brake Pads - Disc Pad Material: Organic

Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel

Steel backed disc brake pad with and organic compound. - Fits Zoom Disc Brakes - Steel Back w/ Organic Compound - Qty 1 = enough for 1 wheel

Serfas' DBPS3 MTB Shimano Compatible Disc Pads offer long-lasting, reliable braking. They're semi-metallic for durability and are compatible with Shimano Deore Hydraulic BR-M555 brakes.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop's newest super lightweight anodized forged aluminum holder with their Thicker V2 Dual Compound insert pads installed. Features: - Curved Aluminum Holder - Integrated Pad-Lock Hardware - Secured Lock Pin - Thicker Pad for Longer Pad Life - Rim-Friendly Compound - Offset Post Compounds: - Dual: A fusion of Kool-Stop's black and salmon compounds which delivers superb braking in all-weather conditions. This combination produces a more controlled smooth stop! - Electric: Kool-Stop's E-bike compound is formulated specifically for the higher speeds and weights of electric bicycles. - Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear. Specifications: - Weight per pair: 44.8 grams - Overall length: 72.5 mm - Pad contact width: 8.5 mm

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad material: steel - Compound: sintered - Compatibility: Formula Mega,The One,C1,R1,RR1,RX,RO,T1

• 107mm arch for better clearance with mud guard • Updated rubber boots secure attachment to lead pipe • Strong braking power with excellent braking control • Cartridge shoe holder • Color options: Black, Silver

- Pad sets include pads and retraction spring for one caliper

· CNC machined in Barnoldswick, England · Includes mounting bolts

Shimano G04S metal disc brake pads. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Ventilated steel backing plate for improved heat dispersion - Backing Plate Material: Steel - Compound: Metal

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Shimano G04Ti Metal Disc Brake Pads deliver superlight, long-lasting braking power. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Titanium backing plate for light weight and improved heat insulation

- Truly universal compatibility (adjustable cable pull for linear/mech disc or caliper/cantilever) - 22.2mm (7/8") clamp - Return spring/reach adjustment - Forged alloy construction - 3-finger lever design - 206g pair

Kool-Stop disc brake pads designed for use with Shimano disc brakes. - Features a copper plated backing plate and sintered pad compound for extreme conditions like down hill - Compatible with Shimano direct mount BR-RS505/805, Dura Ace BR-R9170, Ultegra BR-R8070/BR-R7070, GRX BR-RX810/BR-RX400, Metrea BR-U5000, XTR M9100, and Tiagra 4770

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

- Complete caliper replacement for avid hydraulic disc brake systems - Calipers are 74mm post-Mount to be used with applicable adapters - Includes: Caliper, bleed screw(S), pistons, and brake pads

Keep your disc brakes working great with Jagwire's Mountain Pro Extreme Disc Brake Pads. An aggressive sintered compound is mounted to a vented, steel backing plate making these pads perfect for wet conditions and downhill riding. These are the correct replacement pads for most Shimano disc brakes.

The Dura Road Pad is a forged aluminum holder with dual pivot adjustment that houses Kool-Stop's Dual Compound Dura Type insert and comes with an extra pair of their aggressive salmon compound inserts. These will fit most Shimano type brake systems. Features: - Aluminum Holder - Patented Plow Tip - Water Grooves - Dual Pivot Adjustment - Dual Compound - Extra pair of pads Specifications: - Weight per pair: 34 grams - Overall length: 55.5 mm - Pad contact width: 9.8 mm

Bred from the racetrack, the newly formulated Performance Resin Pads are our highest performing pads to date. - New Performance Resin Compound - Fits all TRP 4-Piston Calipers - Increased Heat Stability - Shorter Bed-In Process - Provides a lighter lever feel - Increases power transfer with a snappy initial bite - Sold Per Wheel

Semi-Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Semi-metallic compound for minimal noise with maximum power - Fits all TRP four piston calipers and Tektro four piston calipers - Color: TRP red - Sold per wheel - Replacment pad for Tektro Q10YS

Sintered Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes" - Sintered Full Metallic compound - Fits all TRP 4-Piston calipers and Tektro 4-Piston calipers - Color: Gold - Sold per wheel - Replacment pad for Tektro Q11TS

Shimano's Deore V-Brakes feature light lever feel and all-around stopping power. Light, stiff aluminum arms actuate grippy cartridge brake pads. Conical washers set up quickly and easily for optimal braking with low weight.

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

Shimano D02S Metal Disc Brake Pads keep you under control in any conditions. - Fits Saint BR-M820/810 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions.

- 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors -Requires external-type rotor lockring when installing onto 15/20mm axle hub -Aluminum spider -Includes standard type rotor lockring

- Replacement hydraulic tubing with fittings

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

9 Series Disc Brake Pads - One piece connected back plate - Comfort compound offers greater modulation and longer wear life than the Performance compound, but less power - Pair of disc brake pads for one MT5, MT7 caliper

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

8 Series Disc Brake Pads - Disconnected two piece back plate - The Sport Compound offers powerful braking, high durability, and short bed-in time, making it the perfect brake pad for use with e-bikes - Set of four disc brake pads and two pad retaining bolts for one caliper

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.