Expanding replacement bar end caps with hex bolt - Reflective silver graphics - Universal sizing fits most bar styles including Road and MTB - 18.2mm OD
Connecting links for Origin8 chains
Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.
Threaded headset keyed locknut washer - Bag of 10
Forged AL6061-T6 alloy construction with CNC groove design - Machined insert for even clamping force - For use with carbon seat posts - Ultra-lightweight
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MT
$15.99 - $20.99
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MTB)
Standard replacement star nuts for threadless steerers.
Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.
- Unidirectional carbon fiber 1-1/8" headset spacers - Sold in bags of 5
- Provides enhanced chain retention for all 1x drivetrain systems - CNC-machined AL6061 alloy mount with dual-compound chain guide - Co-molded composite and TPR guide plates greatly reduce noise from chain contact - Compatible with 28-38T circular and 26-36T oval chainrings - Boost-compatible - Easily adjustable - Mounting hardware included
Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
• Chain tensioner w/integrated derailleur hanger • Fits most 3/8-inch horizontal dropouts
• Emergency universal replacement derailleur hanger • CNC machined aluminum construction • Anodized and laser etched finish
- Anodized or powder coated finish - Allows for secure clamping - Forged aluminum construction - 34.9mm clamp diameter
Replacement brake hoods for Origin8 Pro Force road levers
Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.
- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap
Seatpost clamp with integrated cover prevents dirt and mud from entering the frame at the seatpost junction - Chamfered edges and ovalized hole design protects carbon frames and seatposts - AL6061-T6 alloy clamp with NBR cover - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height
$6.59 - $7.59
- Machined AL6061 alloy construction - Center sleeve for use with Revolvr outboard bottom brackets - Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model - Seals and protects the bearings from harmful contaminants - Center sleeve only: Revolvr outboard bottom brackets sold separately
- AL6061-T6 alloy seatpost clamp with an integrated adjustable cable guide - Ideal for routing brake and dropper post cables and housing - Chamfered edges and ovalized hole design protects carbon frames and seatposts - 31.8mm for 27.2mm seat posts and 34.9mm for 31.6mm seat posts - 16mm height
This is a bottom bracket adapter that works in conjuction with Origin8 Revolvr BB86/92 Thread-Together bottom brackets to create a PF121 Thread-Together bottom bracket. - Cup Material: AL6061
Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag
- Provides enhanced chain retention for all 1x drivetrain systems - CNC machined AL6061 alloy mount with dual-compound chain guide - Co-molded composite and TPR guide plates greatly reduce noise from chain contact - Compatible with 28-38T circular and 26-36T oval chainrings - Boost-compatible - Easily adjustable - Mounting hardware included
- AL6061 alloy construction - Non-keyed design - Jar of 20 spacers
Integrated spacer and top cap for use with star nuts and standard alloy steerer tubes - Provides a clean and lightweight stem cap solution - 6061-T6 alloy cap with 7075 alloy bolt
Page 1 of 2 Next page