Parts & Accessories
- Sunlite Cottered Pins
$39.99 - $44.99
Aluminum bash guard.
$7.99 - $20.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
$45.43 $56.79 20% Off
- 6.5mm thick 6061 aluminum
$33.99 - $49.99
Forged AL6061-T6 alloy spiders for Origin8 Thruster Series modular cranksets - SRAM 3-bolt interface for crank arm mounting - Available in both single and double chainring configurations for MTB, Boost/Fat, and Road/Cross/Gravel applications - BCD: 104mm 4-Bolt - Type: 1x
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
$13.99 - $15.99
• Square taper interface • Only includes left crank
• Square taper interface • Only includes left crank • 175mm length
- Includes replacement lower roller, 608 2Rs cartridge bearings, axle, bolts, and washers to fit blackspire single-ring roller chain guides
$49.99 - $199.99
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
- Duraluminum alloy outer bolt set with Torx T30 fitting, wrench included
Replacement crank bolt for WeThePeople's Legacy crank.
The North Shore Billet 1×11 Spider replaces the removable chain ring spider so that you can run a SRAM XX1 chain ring on Truvativ X0, X01, X1, X9, GX, S2210, and S1400 cranks. There are no mounting holes for the granny ring and the single ring’s position is designed to give a better chain line throughout the entire gear range. The chain ring tabs accept an optional rock ring for All Mountain or Enduro riding.
- Crank Construction : HOLLOWTECH II - Optimum power transfer
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
$79.99 - $89.99
Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.
$19.99 - $20.99
- Horizontal square interface - Only includes left crank
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
- Replacement left-side crank arm for Shimano STEPS CITY E6000
- Lower slider replacement parts for E-13 chainguides
The new G4 picks up where the famous G3 left off — three consecutive appearances in the Dirt 100 issue, as well as countless World Cup and FMB podiums made it the most sought after full-featured guide on the market. Upgrades to the G4 include a new co-molded upper guide that utilizes a softer durometer TPU material on the interior walls and ceiling to silence drivetrain chatter. An improved material formula is utilized in the updated skid — making the best even better. - NEW Full-size, nylon upper guide with co-molded TPU material on the interior walls and ceiling that silences chain contact. - Integrated skid protects chainrings and glides over rocks and obstacles. - Includes standard pulley and G-slide slider block for quiet, dependable operation in muddy and dank conditions. - Available in "Mini" 32-36t and "Mega" 36-40t sizing - Compatible with chainlines 50mm and wider (55mm and wider on 83mm BB shells)
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Cannondale cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M4 (minus 4mm - dished toward the frame): For Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes - M9 (minus 9mm - dished toward the frame): For standard (non-Ai offset) bikes - M1 (minus 1mm - dished toward the frame): For the Fat CAAD only
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
- Chrome plated CrMo steel chainring bolt/nut sets (Track is NJS approved)
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Page 1 of 5 Next page