Filter By:
- Bar Ends (4)
- BMX (5)
- Bottom Brackets (65)
- Brakes/Levers/Pads (154)
- Cables (45)
- Cassettes/Freewheels (61)
- Chainrings (88)
- Chains (71)
- Show More Categories
- Cranksets (57)
- Derailleurs (71)
- Forks (18)
- Groups (8)
- Handlebar Grips/Tape (53)
- Handlebars (34)
- Headsets (19)
- Pedals (50)
- Saddles (69)
- Seatposts (29)
- Shift/Brake Combinations (17)
- Shifters (25)
- Shocks (2)
- Stems (27)
- Other (279)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$110.00
The beautiful Big Block track fork is available in both 1-inch and 1-1/8-inch sizes. Lugged crown, matching tips, straight blades, and looks that will make your heart melt. It’s the perfect replacement fork for nearly any track bike.
- Material: Full 4130 High Quality Chromoly tapered fork blades, lugged crown, and matching dropouts
- Axle to Crown Length: 375mm
- Offset: 32mm
- Steerer Tube Length: 300mm
- Spacing: 100mm
- Tire Clearance: 32c
- Brake Mount (Fork): mid reach caliper (47mm - 57mm)
$5.76
- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter
$39.95
- Converts an 8-10sp HG splined cassette hub to a Singlespeed. 100g
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$17.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$18.00
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
$21.00 - $139.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$24.00 - $62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$24.99 - $25.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$25.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$25.90 - $139.90
- Complete caliper replacement for avid hydraulic disc brake systems
- Calipers are 74mm post-Mount to be used with applicable adapters
- Includes: Caliper, bleed screw(S), pistons, and brake pads
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$32.00 - $43.99
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$34.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.
$59.95 - $120.00
$120.00
Up to 50% Off
From XC racers to freeriders, Avid's Elixir 3 Hydraulic Disc Brake is a favorite amongst MTBers in the know because its value-to-technology ratio is through the roof. Avid's Taperbore technology and Power Reserve Geometry deliver great modulation and pinpoint stops. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 5.1 fluid for better heat dissipation and resistance to brake fade. Plus, the Elixir's unique integrated reservoir provides a major weight reduction and a sleek look. It even comes complete with Avid's HS1 rotor.
$5.99
- Pre-stretched, stainless 19 strand inner wire
- Slick profile for smooth performance
$24.99
- Cable and housing set with special ferrules and end caps
- Anti-compression housing reinforced with Kevlar and super slick inner sleeve
- Prestretched stainless steel inner cable with slick outer profile
- Rubber donut frame protectors included
- SRAM and Shimano compatible
$24.99 - $31.99
- Heat treated allow steel solid links with solid pins
- Compatible with SRAM, Shimano, and Box 11 speed drivetrains
- Also compatible with Box's 7 speed downhill specific drivetrain
$27.99 - $30.99
The Box Two chain's nickel plating adds both corrosion and wear resistance. All Prime 9 chains have chamfered shifting edges, solid plates, and solid pins to safeguard durability. Our unique inner link spacing is engineered to grab those modern wide/narrow chainrings. We chose to modernize the 9-speed platform due to the chain's spirited reputation.
FEATURES
- Prime 9 Technology
- Our Most Durable Chain
- Wide/Narrow Chainring Compatible
- Durable Hardened Solid Pins
- Includes Nickel Connecting Link
- Nickel Plated Protection
- Extra Long for Long Wheel Base & Cargo Bikes
IMPORTANT NOTES
- Available in 2 lengths: 126L & 144L
- Compatible with BMX 3/32" Chainrings and Cogs
- Compatible with most 10,11, & 12-speed wide/narrow chainrings.
COMPATIBILITY
- Box One Prime 9 11-50T and also 12-50T eBike Cassette Black
- Box Two Prime 9 11-50T and also 12-50T eBike Cassette Black
- Box Three Prime 9 11-50T and also 12-50T eBike Cassette Black
- Box One Prime 9 Rear Derailleur
- Box Two Prime 9 X-Wide Rear Derailleur Black
- Box Three Prime 9 X-Wide Rear Derailleur Black
- Box One Prime 9 Shifter Black
- Box Two Prime 9 Shifter Black
- Box Three Prime 9 Shifter Black
- Box Two Chainring
- Box One Single Speed Aluminum Cogs
- Box One Single Speed Chromoly Cogs
- Box Two Freewheel
- Perfect for your 3/32" BMX Chainring
$44.99
The Box Two shifter is the only shifter on the market (other than our Box One) that comes factory stock with a hinged clamp. Box Two is our performance tier so this shifter still maintains the durable cast aluminum top shell but trades out the Box One's 1-piece pull-lever for a 2-piece resin and steel variant. All Prime 9 shifters take advantage of the 9-speed's inherent durability, simplicity, and reliability. Not only is the shifter mechanism joyfully simplified, but fewer shifts are needed for every mile of travel. And the best part is? Prime 9 is also terribly forgiving so you won't have to constantly adjust your set-up. Available as a multi-shift (pull several gears at once) or single-shift shifter (a sound choice for e-bikes).
$44.99
Designed to pair with Box's 11-speed mountain bike rear derailleurs, the Box Two Twin Lever 11-Speed Shifter has some pretty sweet ergonomics with its dedicated thumb and index finger controls. This new twin lever design is a slightly different design from other brands lever offerings and should help prevent miss shifts and provide precise and reliable gear changes both up and down the cassette. One of our favorite features of the Box Two Twin Lever is its ability to downshift up to four gears at a time so you can roll into a climb with speed and quickly grab the gears you need so you can easily make it to the top.
Its aluminum and glass fiber with nylon composite construction keeps things nice, light, and durable while keeping its cost low. It includes a smooth stainless steel cable so you can get it bolted up to the bars and hit the trail.
$99.99
The Box Four cassette adapts our Prime 9 philosophy of durability, simplicity, and reliability at a great price point. All cogs are stamped from steel, given our durable black coating and then the larger cogs are pinned to each other with spacers for easy installation.
$169.99
Our Box Four tier is for those people who just want less fuss! You're fond of Prime 9, but know 8 is enough, and surely 11-42T is plenty of range for an 8-speed cassette. Our derailleur still has the Limited Slip clutch but now arrives with a more compact cage. The custom 8-speed chain is built for abuse, although it's sophisticated enough to have its own Wide/narrow chainring. Push through fewer gears with a no-nonsense shifter. This combo will transport you to 1 by territory for less than $200.
- Precise fit and smooth function
- Great cable travel range
- Shielded cables for durability
- Includes upper and lower cables
- Use: 1-1/8" BMX
Page 1 of 41
Next page