Parts & Accessories
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Planet Bike's Dial Gauge makes it easy to ensure you always have the right pressure in your tires, which makes the riding easy and helps prevent flats. Built to last, this quality gauge works on all valves and has a large easy-to-read dial.
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original lever, no problem, here's the replacement part to get you back up and running.
Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
• Secures frame pump to frame • Nylon • Also good for use as a watch band
Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
$14.99 - $16.99
Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.
It’s back, the Pro’s favorite! Perfect for Tubeless tires, valve extenders and any Presta valve. It includes Prestacycle's newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for any Presta application. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. Deep head adapts to a wide variety of applications including valve extenders. The head is now very easy to get on and off. This head is a MUST for Tubeless tire users. Allows high-flow inflation with the valve core removed for seating tires. PUSH on / PUSH off – the fastest way to get you going. Made with nickel-plated 6061-T6 alloy – Strong as Brass and only 1/3 the weight. It’s also compatible with Silca pumps and can be adapted to other pump brands with our optional Schrader barb or our floor pump replacement hose. Patent-pending 2-way connector screws onto the Prestaflator threaded connector or directly clamps to a hose.
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
Replacement for Air Tool Pro Pump handle.
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
Mounting kit for Mini Morph and Road Morph G.
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.
Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. CNC machined with stainless steel bearings and a nice polished finish. Kit option includes coupler plus three male plugs and one female plug.
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Replaces worn end on any pump hose. - Head Type: Schrader
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Page 1 of 3 Next page