Skip to main content

We're Into What You're Into ~ SKI * BIKE * SNOWBOARD * RUN

Filter By:

  • Show More Brands

  • Show Fewer Brands

CO2 Inflators

Vittoria Pit Stop Tire Sealant
$10.99 - $15.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Specialized Air Tool C02 Mini Kit (16-gram)
$28.00
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 16-gram C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized Air Tool C02 Mini Kit (25-gram)
$30.00
All the basics in one small, elegant package: that's Specialized's Air Tool C02 Mini Kit. A 25g C02 cartridge, a thread-on inflator head, and a tire lever are all fastened to your seat post with a fast and easy rubber strap. The front of the mounting system even holds two glueless patches for emergencies.
Specialized CPRO2 Pump
$25.00
Get the convenience of CO2 inflation in a super-small pump that can be carried anywhere with Specialized's Cpr02 Pump. This little inflator boasts speedy, controlled inflation with the power of compressed CO2 and uses threaded cartridges
Specialized CPRO2 Trigger With Gauge
$45.00
The easiest way to use CO2. - Gauge confirms proper inflation, making it easy to adjust pressure mid-ride. - Thumb trigger gives precise control. - Accommodates threaded 16g and 25g cartridges. - One 16g CO2 cartridge included.
Specialized Combo2 Pump
$35.00
Get the speed of CO2 inflation and the reliability of a traditional hand pump with Specialized's Combo2. This compact pump that easily fits in a jersey pocket or pack includes a threaded 16-gram CO2 cartridge that stores inside the handle ready for use. You can use the CO2 to inflate your tire or pump to fill it (with the cartridge still inside the handle). There's even a pressure-relief button for fine-tuning your tire pressure.
Specialized SWAT Mini CO2 Head
$12.10
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Serfas MB-3N Micro Blast Inflator Head
$18.00
The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head will get you back on your way in a hurry. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits All Threaded CO2 Cartridge Sizes - Alloy Mini Head With Threaded Spring Push Design - Small, Lightweight, Compact Design - Weight: 18 Grams w/o CO2s
Serfas Micro Blast Alloy w/ CO2 Cartidges
$25.00
With a minimalist design and super low weight, Serfas' Micro Blast is the racer's choice. This CO2 inflator accepts 12- and 16-gram threaded cartridges and boasts an easy-to-use aluminum head with a simple sprung push-on design for quick inflation. It includes 2 16-gram CO2 cartridges and a reusable foam cartridge cover.
Serfas Pro Start Combo Kit
$60.00
The ultimate starter combo kit! • Medium-sized saddle bag • Ballistic nylon bottle cage • 15 function super tool with CO2 inflator • Tire levers • 8-piece patch kit • 2 threaded 16g CO2 cartridges
Portland Design Works Shiny Object CO2 Inflator
$9.99
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 
Lezyne Caddy Sack CO2
$29.99
Lezyne's Caddy Sack CO2 is a complete CO2 inflator and tire repair kit in a simple, weather resistant, reusable pouch. This kit includes a Caddy Sack, Twin Speed Drive, two threaded 16g CO2 cartridges, Power Levers, and a Smart Kit, all the essentials needed to fill your pack for the unexpected tire repair.
Genuine Innovations AirChuck Elite CO2 Tire Inflator
$29.99
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams
Genuine Innovations Proflate CO2 Tire Inflator
$29.99
Genuine Innovations' Proflate is their flagship CO2 inflator. From their EZ Connect Technology to their built-in all-weather nozzle cover, the Proflate is loaded with features that make inflation safer and easier. Simply drop the cartridge into the cup (or screw cartridge into the head of inflator), attach the head, press onto valve stem, pull trigger, and begin controllable inflation. Easy enough to use with one hand, it will get your tire up to your desired pressure in seconds. You’ll be back to your ride in no time. • Trigger Controlled technology for fast, easy and controlled CO2 inflation • Built in Trigger Lock prevents accidental discharge • Built in dirt/water cover • Pressure detection features • Valve interface: Easy connect/Auto-detect head that automatically grips valve when inflation starts • Includes two 16 gram non-threaded CO2 cartridges • Cartridge compatibility: 12 gram threaded, 16 gram threaded & non-threaded, 20 gram threaded, 25 gram threaded (Does NOT work with 12g non-threaded or Big Air!) (each sold separately) • Construction: Glass reinforced nylon with brass internals • Weight: 57 grams
Crank Brothers CO2 25g Cartridges (2 Units) with Inflator
$19.99
CO2 inflator with 2 cartridge set Details - 2 Threaded 25g CO2 cartridge and Klic CO2 head/cartridge adapter (presta only) - Inflator compatible with threaded 12g, 16g, 20g, and 25g cartridges. Specs - Warranty: 5 years - Weight (Inflator): 45g
Crank Brothers Cigar Tool
$29.99
Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty
Blackburn Pro Plugger CO2 Inflator Kit
$60.00
Greatness Complete Take greatness, add more = more greatness. The simply stellar Pro Plugger gains a few extra ingredients for surefire success, the it-makes-sense CO2’FER head combining an inflator and valve tool along with a 25g threaded CO2 and universal frame-mounting kit, mean everything’s always within reach, even on bikes with long reach. No need to scurry about rounding up odds and ends trying to beat dwindling daylight—simply grab bike, go and you’re already equipped with the Pro Plugger Combo’s on-bike tubeless repair system. - Pro plugger rubber mount, strap, core CO2 inflator and 25g threaded CO2 included
XLAB Multi-Strike Repair Holder
$27.95
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
XLAB Starter Kit
$93.95
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Topeak Airbooster G2 CO2 Inflator
$44.95
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
SKS Airbuster CO2 Inflator
$24.99
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
SKS TL-Head Set
$32.99
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
Profile Design CO2 Mounting Bracket
$16.99
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Pro Micro C02 Inflator
$19.99
- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible
Portland Design Works Barkeep Inflator
$35.00
The BARkeep integrates Portland Design Works' exclusive Tap Handle technology that carefully controls the flow of CO2. Compatible with both Presta and Schrader valves, the BARkeep also integrates a pressure gauge to ensure a perfect pour to fix your flat. A beginner-friendly CO2 inflator! - CO2 inflator with integrated pressure gauge - PDW exclusive Tap Handle technology controls CO2 flow while protecting your hand from frosty cartridges  - Weight: 94g (3.3oz) - Length with Tap Handle: 175mm (6.9") - Length without Tap Handle: 87mm (3.5")
Portland Design Works Co2 Cartridge 3 Pack
$10.00
Portland Design Works' 16 ounce Co2 Cartridges are threaded, work with most Co2 inflators that require threaded cartridges, and are food-grade so they're completely gentle and safe for your valves and tubes.
Portland Design Works Fatty Object CO2 Inflator w/Cartridge
$35.00
The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz)  - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty
Portland Design Works Ninja Pump
$35.00
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty
Portland Design Works Shiny Object CO2 Inflator w/cartridge
$26.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. It includes a control knob to keep you in charge of the pressure and a threaded Co2 cartridge with a neat leather sleeve. And, it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)  - Leather sleeve length: 55 mm (2.25") - Weight of inflator with cartridge: 80 g (3 oz)
Portland Design Works Tiny Object
$22.00
Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs. - Presta valve compatible - Control knob easily regulates CO2 flow - Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes - Lifetime PDWarranty
Page 1 of 3 Next page